Dental Model DM12 1kg

Dental Model DM12 is the ideal choice for printing separated models for crown and bridge application. DM12 optimizes model precision through its lower elasticity and higher flexural modulus compared to the previous DM11. The hardness and mechanical properties of the cured resin allow the DM12 to resist abrasion during seating and finishing for crown and bridge cases, ensuring a perfect fit every time. The yellow color offers maximum detection of margin lines and adjacent contours, and cleanup is easy thanks to the low viscosity of the resin.

Physical Properties – Liquid Status

• Color Yellow
• Viscosity @25℃ | cps 255
• Wavelength 405nm

Mechanical Properties – Post Cured Parts

• Hardness | Shore D Value: 81 | Test Method: ISO 868
• Tensile Modulus | MPa Value: 1404 | Test Method: ISO 527
• Tensile Strength | MPa Value: 29 | Test Method: ISO 527
• Elongation at break | % Value: 11 | Test Method: ISO 527
• Flexural Modulus | MPa Value: 1537 | Test Method: ISO 178
• Flexural Strength | MPa Value: 52 | Test Method: ISO 178
• Cleaning time with 95% ethanol Manual cleaning: 30 + 30 secs
• Recommended curing time Fabcure 1: 10 mins, Fabcure 2: 7 mins

Shipping Fee

•  1 - 6 bottles any type of resins: shipping fee USD 15/shipment
• > 6 bottles any type of resins: Free Shipping

Certificate

Delivery & Storage